科研之友
微信
新浪微博
Facebook
分享链接
摘要
In-mold hot-pressing is a common drying method in the production of pulp moulded tableware. The wet paper mold embryo obtained after moulding is heated under the condition of extrusion and vacuum. Heating plate is the heat source of hot-pressing machine, and the temperature uniformity of its working surface affects the drying quality of products. Aiming at the temperature non-uniformity of the heating plate in the process of pulp molding hot pressing, this paper proposed an optimization method which combined simulation and orthogonal experiment. Firstly, the working process of heating plate was analyzed and the heat transfer model of heating plate was established. Then, based on Fluent, the temperature field was simulated numerically. According to the results of temperature field distribution, the high-temperature area and low-temperature area in the oil circuit structure were staggered as far as possible, and four new labyrinth oil circuit structures were designed. Finally, an orthogonal test with 4 factors and 4 levels was designed based on the structure of oil circuit, the plane height of oil circuit, the thickness of heating plate and the section diameter of oil circuit, and the range analysis and variance analysis were carried out. The results show that during the actual drying process, the maximum temperature and minimum temperature of the working surface are 224. 47 ℃ and 209. 92 ℃, respectively, and the temperature range is as high as 14. 55 ℃ and the temperature standard deviation is 3. 01 ℃. The thickness of heating plate and the diameter of oil passage have a significant influence on the temperature difference, and the structure of oil passage has a significant influence on the temperature standard deviation. Based on the above analysis, the structure of heating plate was improved. Compared with the original design, the temperature range of the working surface of heating plate has been reduced to 7. 27 ℃ and the temperature standard deviation has been reduced to 1. 09 ℃, which ensures the uniformity of temperature of heating plate and improves the quality of pulp molded products. ? 2023 South China University of Technology.
- 单位
