Finite Element Analysis of a Micro Shoe Press Roller Based on ABAQUS Software [基于ABAQUS软件的一种微型靴压对辊的有限元分析]

作者：Shen Z.; Hu Q.^*; Li M.

来源：China Pulp and Paper, 2021, 40(3): 42-48.

DOI：10.11980/j.issn.0254-508X.2021.03.007

• ABAQUS software
• Dynamic modal analysis
• Micro shoe press roller
• Static analysis
• Thermal analysis

In this study, Creo software was used to establish a three-dimensional model of a micro shoe press roller. Then the static analysis, thermal analysis and dynamic modal analysis were carried out with ABAQUS software. The static analysis results showed that it was a linear function between the linear pressure of the micro shoe press roller and the maximum deflection of the roller surface were linear functions, and the maximum linear pressure was about 325 kN/m. The thermal analysis results showed that the strain of micro shoe press roller was mainly caused by the linear pressure and its own gravity, the influence of thermal stress was negative. The results of dynamic modal analysis showed that its each order the natural frequencies were far away from operation frequency, the resonance phenomenon would not occur.

• 单位
  制浆造纸工程国家重点实验室; 华南理工大学