Research on Preparation of Lightweight Thermal Insulation Foam Ceramics by Layered and Partitioned Distribution Technology [分层分区布料工艺制备轻质保温发泡陶瓷的研究]

作者：Zhao W.; Wang Z.; Dai Y.-G.; Zhang G.-T.; Nan N.

来源：Journal of Synthetic Crystals, 2019, 48(7): 1356-1359 and 1371.

• Distribution technology
• Foam ceramics
• Layered and partitioned
• Molybdenum tailing

At present, the preparation of lightweight thermal insulation foam ceramics with solid waste has become a hotspot. But there are few researches on the distribution technology of foam ceramics. In this paper, using molybdenum tailings as main raw material, and different content of foaming agent SiC is added respectively. Then, the lightweight thermal insulation foaming ceramics was sintered with layered and partitioned distribution technology. The effects of foaming agent content and distribution method on the properties of foam ceramic samples were investigated. Finally, the foaming ceramics with uniform foaming, bulk density of 0.44 g/cm3, compressive strength of 3.9 MPa and thermal conductivity of 0.15 W/(m?k) were obtained. In this study, the foam ceramics were prepared by layered and partitioned distribution technology, which provided a feasible way to shorten the firing cycle of foam ceramics.

• 单位
  华南理工大学